Instructions for Installing an Artificial Green Wall

Tools Required:

For Plaster Walls

  • Staple Gun
  • Drill & Screw Drill Head + Screws

For Walls/Fences

  • Cable ties
  • Scissors

For Brick, Concrete, or Masonry Walls

  • Concrete / Brick Anchor Plugs
  • Hammer, Drill + Drill Bit

Preparation:

Measure your space (multiply length times width to calculate the total square feet required) and order enough panels to cover the wall or fence you seek to beautify.  Different panels have different dimensions.

Mark up the area where you wish to install the panels.

Ensure that the area you are installing the green wall does not obstruct any switches or important access entrances.

Installation:

For Plaster Walls

Simply staple the panels to the wall/fence or use a drill and add screws and washers.

For Walls/Fences

– Push a cable tie through the vertical garden panel and loop it back around through the head of the cable tie and pull tight.

– Cut off the excess end of the cable tie.

For Brick, Concrete, or Masonry Walls

– Drill your hole adjacent to the backing mesh.
– Place the plug into the wall whilst holding the vertical garden panel against the wall
– Hammer or insert the wall fixing whilst ensuring the head of the fixing grips the panel against the wall